Industrial metal detectors for wet environment, MS-3117-HI conveyor mounted metal detectors IP-65 protection from Nissin Electronics, Metal detectors for food, pharmaceuticals, tobacco, chemicals, beverages, meat, smallgoods, seafood, conveyor mounted metal detectors, high metal detection sensitivity

	Search the Internet in a flash
	MS-3117 METAL DETECTORS

Subscribe to Free iNFO service

Email Address

First Name

Last Name
Primary Interest
	Metal Detectors
	Needle Detectors
	X-Ray
	PinHole Detectors
	Checkweighers
	Weigh fillers
	Tablets Counting
	Horizontal Wrappers
	Bagging Machines
	Multihead Combination Weighers
	Case Packers
	Labelling
	Pasta Processing Packaging
	Fruits Processing Packaging
	Vegetables Processing Packaging
	Tomato Processing Packaging
	CITECT SCADA
	Data Communication Converters

Others

Conveyor mounted metal detector suitable for wet environment -

This model is suitable for inspection of small packed product, special version HI for wet environment is available.
High Metal Detection Sensitivity
SUS304 0.6 mm balls and steel 0.3 mm balls are detectable.
Easy Operation and Adjustment
1. Interactive Display
The large, easily legible display makes operability easy.

2. Automatic Sensitivity Setting
Simply by feeding a product through the detection unit several times makes it possible to store the product characteristics in memory and automatically set to the optimum sensitivity, thereby eliminating the need for bothersome adjustment procedures.
(If required, manual adjustment is also available.)

3. Effect Automatic Tracking
The characteristics of a product (product effect) change due to changes in product temperature and so forth. This function tracks these changes and automatically keeps the most adequate setting at all times.

4. Setting of 200 Products
The characteristics of up to 200 products can be stored in memory in accommodation of production lines handling a wide range of products. Kind of products is displayed using product names.
HACCP Compatibility
Conveyor belt can be easily detached and attached for cleaning.
And the structure makes retention of product dust minimum, while waterproof (IP65-compatible) types can be washed with water.
Compatibility with External Communications
This function allows the detector to transmit data to related equipment using an RS422 or RS232C interface (optional).
History Display
Operation history can be confirmed in indicator.
The last 999 operations including power on/off, setting change, metal detection, etc. are stored in memory with each time.
In addition to the above, customized specification meets with your requirement is also available.

Standard Specifications

MODEL	MS-3117-25S/HI/SI	MS-3117-35S/HI/SI
Belt width:-	250 mm	350 mm
Effective Aperture Height:-	80 mm	80 mm
Max. sensitivity*1 Fe balls SUS304 balls :-	0.3 mm 0.6 mm	0.4 mm 0.7 mm
Conveyor total length:-	740 mm
Belt speed:-	Belt speed 20 m/min (50 Hz), 24 m/min (60 Hz)
Max. product weight:-	3 kg
After detection:-	Conveyor stops automatically, rejector (option)
Power supply:-	AC 220 V, 50/60 Hz
Weight Approx. :-	107 kg
Power consumption:-	Approx. 300 VA

*1: These data show results of measurements at factory.
Please note that actual detecting sensitivity depends on the product characteristics and operation environment.

Equipment dimensions

MODEL	MS-3117-25S/HI/SI	MS-3117-35S/HI/SI
BW:-	250 mm	350 mm
Search coil width:-	350 mm	450 mm
A:-	290 mm	340 mm
B:-	305 mm	355 mm
C:-	1122 mm	1122 mm
D:-	550 mm	650 mm
E:-	500 mm	600 mm
W:-	595 mm	695 mm

Complete turnkeys packaging solutions are available on request.

Please contact us on info@nissinmetaldetectors.com to discuss your application.

MS-3117-HI conveyor mounted metal detector

ND-820U control panel

MS-1117 conveyor mounted metal detector

MS-3117 conveyor mounted metal detector